After cleaning and using the spray gun, the spray gun a […]
After cleaning and using the spray gun, the spray gun and its accessories should be cleaned immediately. Careless maintenance and cleaning are the main reasons for the failure of the spray gun.
When cleaning the spray gun, first remove the spray gun head and flow the suction pipe into the cup. Then loosen the air cap for 2-3 turns, block the air cap with a folded rag, and then pull the trigger. This allows the paint in the spray gun to flow back into the makeup bottle.
Tighten the air cap again and pour out the lotion in the cosmetic bottle. Clean the inside and cover of the cup with solvent and a thin brush) Wipe off the residue with a cloth soaked in solvent. Then pour a little clean detergent into the cup, pull the trigger, spray the detergent out, and clean the feeding pipe. Then remove the air cap, soak it in the diluent or solvent, and use a soft brush like a round headed toothbrush or a straw broom to clean the plugged holes. Remember, never use such things as iron wire or nails to clean these holes, because these holes are drilled by finishing. Clean the nozzle with a spray gun brush and solvent. Wipe the outside of the gun body with a rag soaked with thinner, and pay attention to wiping off all traces of lotion.
During operations such as cleaning the spray gun, a large amount of solution will remain.
Ningbo Seng Cze Macrospray Co., Ltd. was established in 1988 and is a company specializing in manufacturing trigger sprayer, lotion pump, foam pump, fine mist sprayer and caps for over 30 years of professional experience. We are located in Yuyao, Ningbo, China.SengCze fully implements the ISO9001 quality management system. With advanced production techniques, world-class high profile production machinery, accumulated production experience, scientific management and superior customer services, we have laid a firm foundation for the long-term collaboration with our clients.
Ningbo Seng Cze Macrospray Co., Ltd.